[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.161 (builder@buildhost) (aarch64-openwrt-linux-musl-
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000] On node 0 totalpages: 242688
[    0.000000]   DMA zone: 3792 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 242688 pages, LIFO batch:63
[    0.000000] percpu: Embedded 21 pages/cpu s45848 r8192 d31976 u86016
[    0.000000] pcpu-alloc: s45848 r8192 d31976 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 238896
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enabl
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linea
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 873864K/970752K available (7806K kernel code, 884K rwdata, 1248
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980465110
[    0.000244] Console: colour dummy device 80x25
[    0.000649] printk: console [tty1] enabled
[    0.000691] Calibrating delay loop (skipped), value calculated using timer frequenc
[    0.000725] pid_max: default: 32768 minimum: 301
[    0.000924] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.000965] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linea
[    0.001758] cgroup: Disabling memory control group subsystem
[    0.003055] rcu: Hierarchical SRCU implementation.
[    0.003286] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.003861] smp: Bringing up secondary CPUs ...
[    0.004437] Detected VIPT I-cache on CPU1
[    0.004511] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.005310] Detected VIPT I-cache on CPU2
[    0.005360] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.006053] Detected VIPT I-cache on CPU3
[    0.006096] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.006247] smp: Brought up 1 node, 4 CPUs
[    0.006333] SMP: Total of 4 processors activated.
[    0.006352] CPU features: detected: 32-bit EL0 Support
[    0.006370] CPU features: detected: CRC32 instructions
[    0.006442] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 s
[    0.006467] CPU: All CPU(s) started at EL2
[    0.006501] alternatives: patching kernel code
[    0.017629] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle
[    0.017689] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.021031] pinctrl core: initialized pinctrl subsystem
[    0.022737] NET: Registered protocol family 16
[    0.028658] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.029402] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocatio
[    0.030229] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocat
[    0.030878] thermal_sys: Registered thermal governor 'step_wise'
[    0.031067] cpuidle: using governor ladder
[    0.031119] cpuidle: using governor menu
[    0.031464] ASID allocator initialised with 65536 entries
[    0.031600] Serial: AMBA PL011 UART driver
[    0.040958] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.060109] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-19
[    0.070105] raspberrypi-firmware soc:firmware: Firmware hash is ef2c018dccdeb94b037
[    0.102775] cryptd: max_cpu_qlen set to 1000
[    0.104977] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[    0.106977] SCSI subsystem initialized
[    0.107186] usbcore: registered new interface driver usbfs
[    0.107247] usbcore: registered new interface driver hub
[    0.107300] usbcore: registered new device driver usb
[    0.108821] clocksource: Switched to clocksource arch_sys_counter
[    0.113765] NET: Registered protocol family 2
[    0.114076] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.115342] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes,
[    0.115414] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear
[    0.115542] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.115748] TCP: Hash tables configured (established 8192 bind 8192)
[    0.115973] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.116033] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.116266] NET: Registered protocol family 1
[    0.116313] PCI: CLS 0 bytes, default 64
[    0.120950] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.126510] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.199657] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.202155] bcm2708_fb soc:fb: FB found 1 display(s)
[    0.263645] Console: switching to colour frame buffer device 210x65
[    0.292203] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1680x1050
[    0.294843] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.296219] bcm2835-rng 3f104000.rng: hwrng registered
[    0.296539] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(10
[    0.296553] random: crng init done
[    0.297286] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.308902] brd: module loaded
[    0.313814] loop: module loaded
[    0.314728] Loading iSCSI transport class v2.0-870.
[    0.316466] usbcore: registered new interface driver lan78xx
[    0.316690] usbcore: registered new interface driver smsc95xx
[    0.316863] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.045095] Core Release: 2.80a
[    1.045200] Setting default values for core params
[    1.045361] Finished setting default values for core params
[    1.245786] Using Buffer DMA mode
[    1.245893] Periodic Transfer Interrupt Enhancement - disabled
[    1.246059] Multiprocessor Interrupt Enhancement - disabled
[    1.246219] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.246353] Dedicated Tx FIFOs mode
[    1.247217] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = ffffffc010f
[    1.247588] FIQ FSM acceleration enabled for :
[    1.247588] Non-periodic Split Transactions
[    1.247588] Periodic Split Transactions
[    1.247588] High-Speed Isochronous Endpoints
[    1.247588] Interrupt/Control Split Transaction hack enabled
[    1.248172] dwc_otg: Microframe scheduler enabled
[    1.248214] WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc010b2d000
[    1.248469] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.248638] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.248891] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[    1.249091] Init: Port Power? op_state=1
[    1.249207] Init: Power Port (0)
[    1.249515] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevic
[    1.257512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.265457] usb usb1: Product: DWC OTG Controller
[    1.273434] usb usb1: Manufacturer: Linux 5.10.161 dwc_otg_hcd
[    1.281509] usb usb1: SerialNumber: 3f980000.usb
[    1.282010] hub 1-0:1.0: USB hub found
[    1.297497] hub 1-0:1.0: 1 port detected
[    1.306021] dwc_otg: FIQ enabled
[    1.306028] dwc_otg: NAK holdoff enabled
[    1.306032] dwc_otg: FIQ split-transaction FSM enabled
[    1.306044] Module dwc_common_port init
[    1.306473] usbcore: registered new interface driver uas
[    1.314408] usbcore: registered new interface driver usb-storage
[    1.322224] mousedev: PS/2 mouse device common for all mice
[    1.330447] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.339787] sdhci: Secure Digital Host Controller Interface driver
[    1.347422] sdhci: Copyright(c) Pierre Ossman
[    1.353223] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[    1.357439] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    1.361485] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.369504] NET: Registered protocol family 10
[    1.374216] Segment Routing with IPv6
[    1.378178] NET: Registered protocol family 17
[    1.382116] bridge: filtering via arp/ip/ip6tables is no longer available by defaul
[    1.386163] 8021q: 802.1Q VLAN Support v1.8
[    1.390543] Key type .fscrypt registered
[    1.394502] Key type fscrypt-provisioning registered
[    1.402994] uart-pl011 3f201000.serial: there is not valid maps for state default
[    1.407116] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    1.411211] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) i
[    1.428940] Indeed it is in host mode hprt0 = 00021501
[    1.438628] printk: console [ttyAMA0] enabled
[    1.648823] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.656793] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.660394] Indeed it is in host mode hprt0 = 00001101
[    1.668336] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.911838] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice
[    1.920020] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    1.945779] sdhost: log_buf @ 00000000f6958d58 (c1860000)
[    1.947953] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.015359] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.026039] hub 1-1:1.0: USB hub found
[    2.034701] of_cfs_init
[    2.036617] hub 1-1:1.0: 5 ports detected
[    2.039805] of_cfs_init: OK
[    2.418821] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.468552] Waiting for root device /dev/mmcblk0p2...
[    2.483080] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.495492] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.507841] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.521692] mmc0: host does not support reading read-only switch, assuming write-en
[    2.534683] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.545542] mmc0: new high speed SD card at address e5a9
[    2.555884] mmcblk0: mmc0:e5a9 SD01G 947 MiB
[    2.565143]  mmcblk0: p1 p2
[    2.589103] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevi
[    2.601947] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.616946] smsc95xx v2.0.0
[    2.625985] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    2.638110] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.638497] Freeing unused kernel memory: 448K
[    2.668911] Run /sbin/init as init process
[    2.677390]   with arguments:
[    2.677394]     /sbin/init
[    2.677397]   with environment:
[    2.677399]     HOME=/
[    2.677402]     TERM=linux
[    2.729871] mmc1: new high speed SDIO card at address 0001
[    2.773948] init: Console is alive
[    2.784539] init: - watchdog -
[    2.911658] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.929679] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.944703] init: - preinit -
[    3.001083] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bu
[    3.020180] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, s
[    3.138855] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    3.156465] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    3.180621] smsc95xx 1-1.1:1.0 eth0: Link is Down
[    3.333115] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2113, bcdDevi
[    3.350238] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.364515] usb 1-1.2: Product: Dell KB216 Wired Keyboard
[    3.478858] usb 1-1.3: new low-speed USB device number 5 using dwc_otg
[    3.623221] usb 1-1.3: New USB device found, idVendor=04b3, idProduct=310c, bcdDevi
[    3.640237] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.656204] usb 1-1.3: Product: USB Optical Mouse
[    5.299934] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
[    5.316238] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.256753] mount_root: mounting /dev/root
[    6.360147] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.416453] urandom-seed: Seed file not found (/etc/urandom.seed)
[    6.444324] smsc95xx 1-1.1:1.0 eth0: Link is Down
[    6.456557] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    6.473640] procd: - early -
[    6.480988] procd: - watchdog -
[    7.021150] procd: - watchdog -
[    7.033655] procd: - ubus -
[    7.097110] procd: - init -
[    7.111171] uart-pl011 3f201000.serial: no DMA platform data
[    7.243179] kmodloader: loading kernel modules from /etc/modules.d/*
[    7.271606] hid: raw HID events driver (C) Jiri Kosina
[    7.282087] snd_bcm2835: module is from the staging directory, the quality is unkno
[    7.309899] Loading modules backported from Linux version v5.15.81-0-ge4a7232c917c
[    7.321767] Backport generated by backports.git v5.15.81-1-0-ge1867d55
[    7.350939] input: Dell KB216 Wired Keyboard as /devices/platform/soc/3f980000.usb/
[    7.439153] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard
[    7.478185] input: Dell KB216 Wired Keyboard System Control as /devices/platform/so
[    7.559044] input: Dell KB216 Wired Keyboard Consumer Control as /devices/platform/
[    7.579567] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [D
[    7.601918] input: USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1
[    7.621219] hid-generic 0003:04B3:310C.0003: input,hidraw2: USB HID v1.11 Mouse [US
[    7.640507] usbcore: registered new interface driver usbhid
[    7.653491] usbhid: USB HID core driver
[    7.705283] PPP generic driver version 2.4.2
[    7.717090] NET: Registered protocol family 24
[    7.738733] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chi
[    7.753340] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.
[    7.770614] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac
[    7.965347] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chi
[    7.986872] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2021
[    8.028082] usbcore: registered new interface driver brcmfmac
[    8.045531] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.261220] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   21.289853] smsc95xx 1-1.1:1.0 eth0: Link is Down
[   21.301685] br-lan: port 1(eth0) entered blocking state
[   21.313528] br-lan: port 1(eth0) entered disabled state
[   21.325402] device eth0 entered promiscuous mode
[   23.369946] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   23.388325] br-lan: port 1(eth0) entered blocking state
[   23.403840] br-lan: port 1(eth0) entered forwarding state
[   23.420410] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Show more